2.4. Electrical risk
Risk of electric shock! Danger of property damage!
• Only qualied and authorized personnel are allowed to intervene on the product.
• Failure to follow the product instructions and this safety information may occur in personal injury, electric shock,
burns or property damage.
• Before proceeding to the assembly(editing), maintains, cleaning, dismantling, in the connection or in the
modications, the product and the installation must be switched off otherwise you risk to be electrocuted. In
addition, damage can occur in the installation and the product can be destroyed.
• The instructions are valid in conjunction with the specic instructions of the product.
• The products are designed exclusively for the application prescribed in the instructions. Only accessories
authorized or prescribed by SOCOMEC may be used in combination with the devices.
• For any questions regarding the disposal of the product, contact SOCOMEC
• SOCOMEC disclaims any liability for damage caused to property or persons caused by errors that may have
occurred in this document.
WARNING
All operations and maintenance must be performed by authorised personnel who have undertaken suitable training.
Scrupulously follow the operating or maintenance instructions described in this manual.
Take maximum precautions and determine which parts are live:
• by following the load diagrams,
• by checking the presence of power with a voltmeter, for example.
In normal operating conditions, there is no danger for personnel handling this equipment.
2.5. Risk of power cut
WARNING
Scrupulously follow the operating instructions described in this manual to prevent inadvertent power cuts which
may pose a safety hazard to the user.
DANGER
Taking into account the presence of high leakage currents, it is essential to connect the ground cable
before connecting the upstream and load sources.
Hazardous voltage may be present within STATYS after it is switched off.
In fact, the power supply voltage remains present at the input of each static contactor
To Next Page
Loading...
Need help?
General