Chapter 3: Installing the Inverter
Install the inverter either before or after the modules and power optimizers have been
installed.
CAUTION!
Do not rest the connectors at the bottom of the inverter on the ground, as it
may damage them. To rest the inverter on the ground, lay it on its back.
Inverter Package Contents
One StorEdge inverter
One mounting bracket
Two Allen screws for fastening the inverter to the mounting bracket
Installation guide
Two48 mm ferrite beads
One 39 mm ferrite bead
Lugs and M8 screws for connecting battery cables on the inverter side
Heat-shrink tubing
Identifying the Inverter
Refer to the sticker on the inverter that specifies its Serial Number and its Electrical
Ratings. Provide the serial number when contacting SolarEdge support. The serial
number is also required when opening a new site in the SolarEdge monitoring platform.
Chapter 3: Installing the Inverter 21
StorEdge Three Phase Inverter MAN-01-00648-1.3
To Next Page
Loading...
Need help?
General