SONOS CONTROL
9
Renaming a Sonos Component
If you name a Sonos component incorrectly, or if you move it to another room, you can rename the component to suit your
preference.
1. From the Settings menu, touch Room Settings. If you wish to change the name of a BRIDGE, touch BRIDGE Settings
instead.
2. Touch to select the room you wish to change.
3. Touch Room Name.
4. Choose one of the following options:
• Drag your finger to scroll the room list, and touch to select the one you want.
• Or, touch Enter New to type a unique name. Use the keyboard to enter the name, and then touch OK.
Turning Off the Status Light
A constant white light displays above the volume controls on Sonos players to indicate that the unit is functioning in normal
operation. If you have a Sonos product located in a bedroom, you may want to turn this light off so that when the unit is in
normal operation it does not display. However, if the status indicator light begins to flash amber, please go to
http://faq.sonos.com/led for additional information.
1. From the Settings menu, touch Room Settings. To turn off a BRIDGE status indicator light, touch BRIDGE Settings
instead.
2. Touch the room you wish to affect.
3. Touch White Status Light. If the option is set to:
• Off, the status indicator light remains off during normal operation.
• On, the status indicator light remains on during normal operation.
To Next Page
Loading...
Need help?
General