A6T/A6/A5 Portable Ultrasonic Diagnostic System
4701-0040-01A
3-80
Measurement formula:
volume = 0.7 × Length × Width × Height.
Measurement method:
1. Press the 【Calc】key to pop up the Meas & Calc menu, move the
trackball, use the cursor to select “Small Part”, press the【SET】key
to go to the submenu, move the trackball to select “URO”, go to
“URO” measurement mode.
2. Measure bladder long diameter Length; see “Distance
Measurement” for the specific method.
3. Measure bladder width Width, see “Distance Measurement” for the
specific method.
4. Measure bladder height Height, see “Distance Measurement” for the
specific method.
5. Based on the formula to perform calculation, the measurement result
is displayed in the result area.
6. Repeat steps (1) to (5) to perform the next measurement.
3.6.2.5.2 Prostate measurement (PSV)
Function:
By measuring length, width and height of prostate, the whole
prostate volume is estimated (Bi-Plane)
To Next Page
Loading...
Need help?
General
