A6T/A6/A5 Portable Ultrasonic Diagnostic System
4701-0040-01A
3-1
3 System Operation
3.1 Operation Notice
Warning:
1． The system shall be operated by a trained medical operator;
2． Before using this system, please read the relevant sections in the
manual carefully.
3.2 Transducer Connection
The transducer ports are at the back of the system.
With the cable side of transducer socket downward, plug in the transducer
and turn the transducer knob clockwise to lock it. To remove the transducer,
turn the knob counter clockwise and plug out the transducer. The transducer
can by plugged in either of the two ports.
See the following figures:
Fig. 3.2a How to connect a transducer
To Next Page
Loading...
Need help?
General
