Sony Bravia KD-65X9005B User Manual

Top Page > Table of Contents > Using Home Network > Displaying the Smartphone’s Screen on the TV (One-
touch mirroring)
Displaying the Smartphone’s Screen on the TV (One-touch mirroring)
Overview
By simply touching a mobile device (such as a smartphone or tablet) on the Touchpad Remote
Control, you can display its screen on your large TV screen.
You can use this “One-touch mirroring” function with a One-touch mirroring compatible device (e.g.
some models of Xperia).
Steps
1. Set the NFC* setting of your smartphone to on.
* NFC: Near Field Communication
2. Touch the NFC detection area of the smartphone to the mark on the Touchpad Remote
Control for about 2 seconds.
Remove the smartphone from the remote when the device confirmation completion message
appears at the bottom of the TV screen.
When the smartphone is connected with the TV, the screen displayed on the smartphone will
also be displayed on the TV.
To optimise the One-touch mirroring function (for experts)
When the standby screen for Screen mirroring is displayed, press the OPTIONS button, then
select [Optimise One-touch mirroring].
[Off]: Normally use this option. It uses the same wireless channel at 2.4GHz as the wireless router
(or access point) is using.
[Auto]: This option uses a wireless channel that may improve video streaming quality. When you
select this setting, the wireless connection between the TV and the wireless router (access point)
is disconnected during One-touch mirroring, therefore communication via the Internet (such as an
incoming call) is stopped.
When your TV is connected to a wireless router (or access point) at 2.4GHz, you can optimise the
wireless connection for the One-touch mirroring function.
Notes
For connection with Xperia, release the screen lock of Xperia, then touch.
For the position of the NFC detection area on the smartphone, refer to the instruction manual of
the smartphone.
If the TV cannot recognise and connect with the smartphone, try again.
List of Contents© 2014 Sony Corporation

Sony Bravia KD-65X9005B Specifications

General

Product color	Black
LED indicators	Yes
Panel mounting interface	400 x 300 mm
Screen shape	Flat
Response time	- ms
Display diagonal	65 \
Display brightness	- cd/m²
Native aspect ratio	16:9
LED backlighting type	-
Supported video modes	1080i, 1080p, 2160p, 480i, 480p, 576i, 576p, 720p
Contrast ratio (dynamic)	1000000:1
Display diagonal (metric)	164 cm
Supported graphics resolutions	3840 x 2160, 4096 x 2160, 1920 x 1080 (HD 1080)
Motion interpolation technology	Motionflow XR 800 Hz
3D glasses quantity	2
Supported file systems	exFAT, FAT16, FAT32, NTFS
Annual energy consumption	250 kWh
Tuner type	Analog & digital
Digital signal format system	DVB-C2, DVB-S2, DVB-T2
Smart modes	Animation, Cinema, Custom, Game, Personal, Photo, Sports, Standard, Vivid
Lifestyle apps	Skype
Sound modes	Movie, Music, Standard
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby Digital Pulse
RMS rated power	65 W
PC in (D-Sub)	No
DVI-D ports quantity	0
USB 2.0 ports quantity	3
Component video (YPbPr/YCbCr) in	1
Consumer Electronics Control (CEC)	BRAVIA Sync
Browser supported	Opera
Audio formats supported	LPCM, MP3, WMA
Image formats supported	JPG, MPO
Video formats supported	3GPP, AVCHD, AVI, MKV, MOV, MP4, MPEG1, MPEG2, WEBM, WMV, XVID
Power consumption (max)	339 W
Power consumption (standby)	0.3 W
Power consumption (typical)	180 W
Package depth	222 mm
Package width	1813 mm
Package height	976 mm
Cables included	AC

Weight and Dimensions

Depth (with stand)	320 mm
Width (with stand)	1716 mm
Height (with stand)	916 mm
Weight (with stand)	46600 g
Depth (without stand)	99 mm
Width (without stand)	1715 mm
Height (without stand)	878 mm