4 (E)
Chapter 1 Overview
Overview
The BVM-D9H1U/D9H1E/D9H1A/D9H5U/D9H5E/
D9H5A are 9 -inch Trinitoron
®1)
Color Monitors. The
BVM-D14H1U/D14H1E/D14H1A/D14H5U/D14H5E/
D14H5A are 14-inch
2)
Trinitoron
®
Color Monitors.
Features
Multiformat
The monitor supports the principal format (480I/480P/
720P/1080I) for the digital broadcasts, NTSC and PAL
color systems, and a wide variety of signals
3)
whose
horizontal frequency is between 15 kHz and 45 kHz.
High resolution picture tube
The HR Trinitron picture tube produces a clear, high
resolution image.
Separate control unit (BVM-D9H1U/D9H1E/
D9H1A/D14H1U/D14H1E/D14H1A)
Using a separate control unit reduces the space needed
for the equipment.
The monitor is controlled by a separate control unit,
such as an optional BKM-10R/11R Monitor Control
Unit or by daisy chain connections.
Controlling monitor groups
Up to 32 monitors can be controlled from one control
unit by the RS-485 serial remote connections. You can
control individual monitors or monitor groups simply
by entering monitor address or group numbers. You
can also execute the same operation on all connected
monitors, or put all connected monitors into the same
setup and adjustment state.
1) Trinitron
®
is a registered trademark of Sony Corporation.
2) 9-inch and 14-inch refer to the CRT size of the monitor.
For effective picture size, see “Specifications” on page 47(E).
3) For details on the signal format, see “Available Signal Format” on page
53(E).
........................................................................................................................................................................................................
Model
BVM-D9H1U/
D9H1E/D9H1A/
D9H5U/D9H5E/
D9H5A
BVM-D14H1U/
D14H1E/D14H1A/
D14H5U/D14H5E/
D14H5A
Resolution at the
center of the picture
450 TV lines (4:3)
340 TV lines (16:9)
800 TV lines (4:3)
600 TV lines (16:9)
Aperture
grille pitch
0.25 mm
0.25 mm
Auto chroma phase and white balance
functions
The chroma and phase of the decoder are
automatically adjusted with the auto chroma phase
function and the color temperature is automatically
adjusted with the auto white balance function by using
the BKM-14L Auto Setup Probe, etc.
4:3 area marker
It is possible to check the 4:3 aspect area in the 16:9
picture by displaying the 4:3 marker.
Expandable input capability
You can obtain HD SDI signals, D1 SDI signals,
NTSC/PAL signals or YP
BPR/RGB signals by
installing the optional input adaptors at the rear of the
monitor. The input connector configuration can be
easily modified and up to three adaptors can be
installed. The BKM-129X Analog Component Input
Adaptor is installed at SLOT 1 at the factory.
Stable color temperature
The beam current feedback circuit maintains a constant
color temperature over long periods of time.
Blue-only mode convenient for monitoring
noise
All three CRT cathodes can be driven with a blue
signal, producing a monochrome display. This mode is
convenient for chroma and phase adjustment, and for
monitoring VTR noise.
To Next Page
Loading...
Need help?
General