Sony BVM-E250 User Manual

Connecting the AC Power Cord
17
6 Attach the arm cover.
To remove the stand and stand
attachment bracket
1 Put the monitor on a soft cloth with the surface of
the monitor downward.
2 Slide and remove the arm cover of the stand.
3 Remove the four screws.
4 Remove the arm.
5 Remove the four screws to remove the stand
attachment bracket.
Connecting the AC
Power Cord
1 Plug the AC power cord into the AC IN socket on
the rear panel. Then, attach the AC plug holder
(supplied) to the AC power cord.
2 Slide the AC plug holder over the cord until it
locks.
To disconnect the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
2
3
4
5
1
AC IN socket
AC power cord
AC plug holder
(supplied)

Sony BVM-E250 Specifications

General

Brand	Sony
Model	BVM-E250
Category	Monitor
Language	English