Sony BVM-E250 User Manual

Selecting the Menu Language
19
2 If LATIN AMERICA is selected:
4 If ASIA EXCEPT JAPAN is selected:
Customers who will use this unit in the shaded
areas shown in the map below should select NTSC
AREA.
Other customers should select PAL AREA.
3 Press the menu selection control.
The SELECT SETTING screen disappears and the
menu item settings suitable for the selected area are
applied.
Note
When you have selected the wrong area, set the
following items using the menu.
• COLOR TEMP (on page 23)
• NTSC SETUP (on page 25)
• COLOR SPACE (on page 24)
• FLICKER FREE (on page 26)
See “The default setting values for each area” (page 18)
on the setting value.
Selecting the Menu
Language
You can select one of seven languages (English, French,
German, Spanish, Italian, Japanese, Chinese) for
displaying the menu and other on-screen displays.
“ENGLISH (English)” is selected in the default setting.
The current settings are displayed in place of the x
marks on the illustrations of the menu screen.
1 Turn on the unit.
2 Press the MENU button.
The menu appears.
The menu presently selected is shown in yellow.
3 Turn the menu selection control to select SYSTEM
SETTING of the USER CONFIG (user
configuration) menu, then press the menu selection
control.
L A T I N A M E R I C A
P A L & P A L - N _ A R E A
A R G E N T I N A
P A R A G U A Y
U R U G U A Y
N T S C & P A L - M A R E A
O T H E R A R E A
PAL&PAL-N area
Argentina
Paraguay
Uruguay
NTSC&PAL-M area
Other area
A S I A E X C E P T J A P A N
N T S C _ A R E A
P A L A R E A
NTSC area
PAL area
SDI 1 SDI 2 F1 F2 F3 F4 F5 F6 F7 COMPOSITE RETURN MENU HDMI
RETURN MENU
123~5
FORMAT xxxxxxxxx
xxxxxxxx
COLOR TEMP xxx
HDMI FORMAT xxxxx
NTSC SETUP x
SCAN MODE xxxxxxxx
GAMMA xxx
I/P MODE xxxxxxx
FLICKER FREE xxx
STATUS 1 /2

Sony BVM-E250 Specifications

General

Brand	Sony
Model	BVM-E250
Category	Monitor
Language	English