Adjustment Using the Menus
25
USER CONFIG menu
The USER CONFIG menu is used for setting the
system, marker, T/C display, WFM/ALM/VECTOR,
focus, function button, closed caption, and audio.
SYSTEM SETTING
INPUT SETTING • SHIFT H: Adjusts the position of
the picture. As the setting
increases, the picture moves
to the right, and as the
setting decreases, the picture
moves to the left.
• SHIFT V: Adjusts the position of
the picture. As the setting
increases, the picture moves
up, and as the setting
decreases, the picture moves
down.
Submenu Setting
NTSC SETUP Selects the NTSC setup level from
two modes.
The 7.5 setup level is used mainly
in North America. The 0 setup level
is used mainly in Japan.
Submenu Setting
SYSTEM SETTING:
MARKER SETTING:
T/C DISPLAY SETTING:
WFM/ALM/VECTOR SETTING:
FOCUS SETTING:
FUNCTION BUTTON SETTING:
CLOSED CAPTION SETTING:
AUDIO SETTING:
USER CONFIG
NTSC SETUP: xxxxxx
FORMAT DISPLAY: xxxxxx
LANGUAGE: ENGLISH
GAMMA: xxxxxx
I/P MODE: xxxxxxx
LED BRIGHTNESS: xxxxxx
RGB RANGE: xxxxxx
DVI: xxxxxx
SCREEN SAVER: xxxxxx
USER CONFIG – SYSTEM SETTING 1/2
FLICKER FREE: xxxxxx
SD PIXEL MAPPING: xxxxxxx
USER CONFIG – SYSTEM SETTING 2/2
FORMAT DISPLAY Selects the display mode of the
signal format and scan mode.
• OFF: The display is hidden.
• AUTO: The format and scan
mode are displayed for
about five seconds when the
input of the signal starts.
LANGUAGE Selects the menu or message
language from among seven
languages.
• ENGLISH: English
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• : Japanese
•: Chinese
GAMMA Select the appropriate gamma mode
from among 2.4, 2.2, and CRT.
If you select the CRT mode while
either ITU-709 or OFF is selected
in COLOR SPACE, gamma
settings are adjusted to those in the
gamma 2.4 mode.
The factory setting is gamma 2.4
that is specified by ITU-R BT.1886.
By using this gamma the dark areas
may appear darker than that of a
CRT or LCD. If you want to set the
gamma to that of a CRT or LCD,
select CRT or 2.2. Also if the
blacks appear to be crushed, adjust
BRIGHTNESS to show more
detail.
Submenu Setting