Deleting images
, Set the mode dial to , and
turn on the camera.
Press b/B on the control
button to select the image you
want to delete.
• When using a CD-R, the disc remaining space
does not increase even if you delete images.
• When using a CD-RW, the disc remaining
space increases only if you delete the last
image you shot while is indicated on the
LCD screen. If you modify an image, or open
and close the disc cover, disappears.
• It may take some time to delete the images.
, Press (Delete).
The image has not yet been deleted at this
point.
• You cannot delete the protected image
(page 65).
• If the disc remaining space is not sufficient, you
may not be able to delete the image.
, Select [Delete] with v on the
control button, then press z.
When the message “Disc access”
disappears, the image has been deleted.
To continue and delete other images
Display the image to be deleted with
b/B
on the control button. Then, select [Delete]
with
v and press z.
To cancel deleting
Select [Exit] with V on the control button,
then press z.
1
2/9
VGA
101
10:30
PM
2003 7 4101-0002
60
min
BACK/NEXT VOLUME
2
VGA
2/9
101
Delete
Exit
60
min
BACK/NEXTOK
3
VGA
2/9
101
60
min
Delete
Exit
BACK/NEXTOK
To Next Page
Loading...
Need help?
General
