Recording
28
Recording still
images
– Memory photo recording
You can record still images on a “Memory
Stick.” Before recording, follow steps 1 to 7
in “Getting started” (p. 12 - p. 22).
1 Remove the lens cap. Pull the lens cap
string down and attach it to the grip
belt.
2 Press OPEN and open the LCD panel.
3 Slide the POWER switch repeatedly
until the CAMERA-MEMORY lamp
lights up.
The selected recording folder is displayed.
4 Press and hold PHOTO lightly.
You will hear a light beeping sound when
the focus and brightness settings are
adjusted. Recording does not start at this
point.
*The number of images that can be recorded
varies depending on the image size setting and
the recording environment.
5 Press PHOTO fully.
A shutter sound is heard. When bars of
disappears, the image is recorded
on the “Memory Stick.”
To check the most recently recorded
image – Review
Touch .
Touch again to return to standby.
To delete the image, touch , then [YES].
To cancel deleting, touch [NO].
To turn the power off
Slide the POWER switch up to (CHG) OFF.
OPEN
POWER switch
PHOTO
Slide the POWER
switch while pressing
the green button.
The indicator
stops flashing.
The number of images
that can be recorded.*
To Next Page
Loading...
Need help?
General