112
Recording still images on “Memory
Stick”s – Memory photo recording
– DCR-TRV17 only
You can record still pictures on “Memory Stick”s.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Keep pressing PHOTO lightly until the desired still picture appears. The green
z mark stops flashing, then lights up. The brightness of the picture and focus
are adjusted, being targeted for the middle of the picture and are fixed.
Recording does not start yet.
(3) Press PHOTO deeper. The image displayed on the screen will be recorded on a
“Memory Stick.” Recording is complete when the bar scroll indicator
disappears.
3
PHOTO
PHOTO
1 / 100
2
FINE
z
FINE
1
LOCK
VCR
CAMERA
MEMORY
OFF(CHG)
P
O
W
E
R
Number of images can be recorded
on the “Memory Stick”
Number of recorded images
To Next Page
Loading...
Need help?
General