122
Notes
•Sound recorded in 48 kHz is converted to one in 32 kHz when recording images from
a tape to “Memory Stick”s.
•Sound recorded in stereo is converted to monaural sound when recording from tapes.
When the access lamp is lit or flashing
Do not shake or strike the unit. As well do not turn the power off , eject a “Memory
Stick” or remove the battery pack. Otherwise, the image data breakdown may occur.
Titles have already recorded on tapes
You cannot record the titles on “Memory Stick”s. The title does not appear while you
are recording a moving image with START/STOP.
Various settings when recorded
You cannot record the various settings when recorded.
If “ AUDIO ERROR” is displayed
Sound that cannot be recorded by your camcorder has been recorded. Connect the A/V
connecting cable to input images from an external unit used to play back the image.
During recording on “Memory Stick”
•You cannot use the PB ZOOM function.
•You cannot record data codes from tape
Recording a moving picture from other equipment
Before operation
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The image of the other equipment is displayed on the screen.
(3) Follow steps 3 on page 121.
Using the A/V connecting cable
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
Sound is recorded in monaural.
Recording a picture from a tape as a moving picture
OUT
TV
S VIDEO
AUDIO/VIDEO
VIDEO
AUDIO
S VIDEO
: Signal flow
AV connecting cable
To Next Page
Loading...
Need help?
General