To Next Page

To Previous Page

You can automatically search for the point where the recording date changes and start

playback from that point. Use a tape with cassette memory for convenience. Use the

Remote Commander for this operation.

Use this function to check where recording dates change or to edit the tape at each

recording date.

Searching for the date by using cassette memory

Before operation

•You can use this function only when playing back a tape with cassette memory

(p. 158).

•Set CM SEARCH in to ON in the menu settings (p. 100). (The default setting is

ON).

(1) Set the POWER switch to VCR.

(2) Press SEARCH MODE on the Remote Commander repeatedly, until the DATE

SEARCH indicator appears.

The indicator changes as follows:

TITLE SEARCH t DATE SEARCH t PHOTO SEARCH

t PHOTO SCAN t no indicator

(3) Press . or > on the Remote Commander to select the date for playback.

Your camcorder automatically starts playback at the beginning of the selected

date.

To stop searching

Press x.

Searching a recording by date

– Date search

MODE

DATE SEARCH

1 SEP / 5 / 01

2 SEP / 6 / 01

3 DEC / 24 / 01

4 JAN / 1 / 02

5 FEB / 11 / 02

6 APR / 29 / 02