138
Copying the image recorded on “Memory
Stick”s to tapes
– DCR-TRV17 only
You can copy still images or titles recorded on “Memory Stick” and record them to a
tape.
Before operation
•Insert a tape for recording into your camcorder.
•Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Using the video control buttons, search a point where you want to record the
desired still image. Set the tape to playback pause.
(3) Press z REC and the button on its right simultaneously on your camcorder.
The tape is set to the recording pause mode.
(4) Press MEMORY PLAY and select the still image you want to copy by
MEMORY +/–.
(5) Press X to start recording and press X again to stop.
(6) If you have more to copy, repeat steps 4 and 5.
To stop copying in the middle
Press x.
During copying
You cannot operate the following buttons:
– MEMORY PLAY
– MEMORY INDEX
– MEMORY DELETE
– MEMORY +/–
– MEMORY MIX
REC
3
1
2
5
4
PLAY
z
zX
BX
POWER
VCR
CAMERA
MEMORY
OFF(CHG)
To Next Page
Loading...
Need help?
General