119
“Memory Stick” Operations
Recording still images on “Memory Stick”s
– Memory Photo recording
Self-timer memory photo recording
You can record images on “Memory Stick”s with the self-timer. You can also use the
Remote Commander for this operation.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press
(self-timer) in the standby mode. The (self-timer) indicator appears
on the screen.
(3) Press PHOTO firmly.
Self-timer starts counting down from 10 with a beep sound. In the last
2 seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
To record moving pictures on “Memory Stick”s with the self-
timer
Press START/STOP in step 3. To cancel the recording, press START/STOP again.
To cancel self-timer recording
Press (self-timer) so that the (self-timer) indicator disappears from on the LCD
screen or in the viewfinder. You cannot cancel the self-timer recording using the
Remote Commander.
Note
The self-timer recording mode is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHG) or VCR.
To check the image to be recorded
You can check the image with pressing the PHOTO button lightly, then press it deeper
to start the self-timer recording.
1
LOCK
VCR
CAMERA
MEMORY
OFF(CHG)
P
O
W
E
R
(self-timer)
PHOTO
PHOTO
To Next Page
Loading...
Need help?
General