137
“Memory Stick” Operations
Viewing a moving picture
– MPEG movie playback
You can play back moving pictures recorded on a “Memory Stick.” You can also play
back 6 images including still images in order at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Press MEMORY PLAY. The last recorded image is displayed.
(3) Press MEMORY +/– to select the desired moving pictures. To see the previous
picture, press MEMORY –. To see the next picture, press MEMORY +.
(4) Press MPEG N X to start playback.
To stop MPEG movie playback
Press MPEG N X.
Note
You may not be able to play back images with your camcorder:
– when playing back an image data to modified with personal computers.
– when playing back an image data shot with other equipment.
To play back recorded images on a TV screen
•Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder before operation.
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
Recording data
When you press DATA CODE, you can see the recording data (date/time or various
settings when recorded).
When no image is recorded on the “Memory Stick”
The message “ NO FILE” appears.
1
LOCK
PLAY
32
4
MPEG
VCR
CAMERA
MEMORY
OFF(CHG)
POWER
To Next Page
Loading...
Need help?
General