106
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on a “Memory Stick.” See page 156 for more information.
Before operation
Step 1 Connecting the VCR (p. 107)
Step 2 Setting the VCR for operation
– with the A/V connecting cable (p. 107 to 110)
– with the i.LINK cable (p. 111 to 112)
Step 3 Adjusting the synchronization of the VCR (p. 113)
When you dub using the same VCR again, you can skip Step 2 (p. 107 to 112) and
Step 3 (p. 113 to 114).
Using this function
Operation 1 Making a program (p. 115)
Operation 2 Performing the program (Dubbing a tape) (p. 118)
Note
Digital program editing does not work with tapes recorded in the Hi8 /
standard 8 mm system.
Dubbing only desired scenes
– Digital program editing (on tapes)
Unwanted scene Unwanted scene
Switch the order
To Next Page
Need help?
General
