60
To cancel the wide mode
In the standby mode, set the wide mode to OFF in the menu settings.
In the wide mode
You cannot operate the following functions:
– OLD MOVIE (p. 65)
– Recording still images on a “Memory Stick” in tape recording or tape recording
standby
– BOUNCE (p. 61)
Connection for a TV
Pictures recorded in the 16:9WIDE mode automatically appear on the TV screen at full
size when:
– You connect your camcorder to a TV that is compatible with the video ID (ID-1/ID-2)
system.
– You connect your camcorder to the S video jack on the TV.
ID-1 system
The ID-1 system sends aspect ratio (screen horizontal/vertical ratio) information (16:9,
4:3, or letter box) with video signals.
ID-2 system
The ID-2 system sends a copyright protection signal with ID-1 signals inserted between
video signals when you connect your camcorder to other equipment by an A/V
connecting cable.
In the wide mode
The SteadyShot does not work. If you set the wide mode described below in the menu
settings when the SteadyShot is working, the indicator flashes and the SteadyShot
does not function:
– 16:9WIDE to ON
– 16:9WIDE to 16:9FULL
Date or time indicator
When you record in the 16:9FULL mode, the date or time indicator will be widened on
wide-screen TVs.
Using the wide mode
To Next Page
Loading...
Need help?
General
