98
Dubbing a tape easily – Easy Dubbing
VCR operation for dubbing can be controlled easily by using your camcorder
when the VCR is connected.
You can select one of eight preset titles and two custom titles stored in your camcorder
as instructed in “Making your own titles” (p. 77). Select the desired color, size, and
background color of titles.
Using the Easy Dubbing
Step 1 Connecting the VCR
Step 2 Setting the VCR to operate with your camcorder (p. 99 to 102)
Step 3 Selecting the title (p. 103)
Step 4 Selecting the dubbing mode (p. 104)
Step 5 Performing Easy Dubbing (p. 105)
If you dub using the same VCR again, you can skip Step 2 (p. 99 to 102).
If you do not need to put in a title, you can skip Step 3 (p. 103).
Step 1: Connecting the VCR
Connect the devices as illustrated in page 95.
You can edit on VCRs that support the following systems:
8 mm , Hi8 , Digital8 , VHS , S-VHS , VHSC , S-VHSC ,
Betamax , ED Betamax , mini DV , DV , or MICRO MV .
If your VCR has an S video jack
Picture can be reproduced more faithfully by using an S video cable (optional).
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
VCR.
To Next Page
Loading...
Need help?
General
