37
Deleting still images
, Select [Delete] with v on the
control button, then press z.
When the message “Memory Stick access”
disappears, the image has been deleted.
To cancel deleting
Select [Exit] with V on the control button,
then press z.
3
10:30PM2003 7 4101-0002
Delete
Exit
OK BACK/NEXT
Formatting a “Memory Stick”
, Insert the “Memory Stick” you
want to format into the camera.
Set the mode dial to SET UP,
and turn on the power.
• The term “formatting” means preparing a
“Memory Stick” to record images; this process
is also called “initialization.” The “Memory
Stick” provided with this camera, and those
available commercially, are already formatted,
and can be used immediately.
• When you format a “Memory Stick,” be
aware that all data including protected
images in the “Memory Stick” will be
permanently erased.
, Select (Memory Stick Tool)
with v/V on the control button.
Select [Format] with B, then
press B.
Select [OK] with v, then press
z.
To cancel the formatting
Select [Cancel] with V on the control
button, then press z.
• Using the AC Adaptor is recommended to
prevent the power from turning off partway
through formatting.
1
2
OK
Memory Stick Tool
Format:
File Number:
Create REC. folder:
Change REC. folder:
OK
Cancel
2
1
2
1
To Next Page
Loading...
Need help?
General
