47
Using the Menu
SETUP MENU
menu
– CLOCK SET/LANGUAGE, etc.
See page 34 for details on selecting
menu items.
See page 19.
You can select the language to be used on
the LCD screen.
• Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot find
your native tongue among the options.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you have removed a cassette
from your camcorder, and slide the
POWER switch repeatedly to turn on the
CAMERA lamp.
• The demonstration will be suspended in
situations such as those described below.
– When you touch the screen during the
demonstration. (The demonstration starts
again after about 10 minutes.)
– When a cassette is inserted.
– When the POWER switch is set to other than
CAMERA.
OTHERS menu
– WORLD TIME/BEEP, etc.
The default settings are marked with B.
See page 34 for details on selecting
menu items.
When using your camcorder abroad, you
can set the time difference by touching
/ , the clock will be adjusted in
accordance with the time difference.
If you set the time difference to 0, the clock
returns to the originally set time.
B ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
B 5min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
• When you connect your camcorder to a wall
outlet, [A.SHUT OFF] is automatically set to
[NEVER].
B LCD
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/LCD
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
CLOCK SET
LANGUAGE
DEMO MODE
WORLD TIME
BEEP
A.SHUT OFF (Auto shut off)
DISP OUT (Display output)
To Next Page
Loading...
Need help?
Imaging
Display
Power
