Sony Handycam DCR-HC28 User Manual

51
Dubbing/Editing
6 Touch [REC START] at the point
you want to start recording.
7 Stop recording.
Touch (Stop) or [REC PAUSE].
8 Touch [ RET.] t .
Dubbing sound to a
recorded tape
You can add sound to a tape already
recorded in the 12-bit mode (p. 46) without
erasing the original sound.
You can record audio by using the internal
stereo microphone.
• You cannot record additional audio:
– When the tape has been recorded in the 16-bit
mode (p. 46).
– When the tape has been recorded in the LP
mode.
– When your camcorder is connected via an
i.LINK cable.
– When the tape has been recorded in 4CH MIC
mode.
– On blank sections of the tape.
– When the tape has been recorded in a TV
color system other than that of your
camcorder (p. 64).
– When the write-protect tab of the cassette is
set to SAVE (p. 65).
– On sections recorded in HDV format.
• When you add sound, the picture will not be
output from the A/V OUT jack. Check the
picture on the LCD screen or the viewfinder.
Internal stereo
microphone
Continued ,

Sony Handycam DCR-HC28 Specifications

Imaging

imaging device	1/6" CCD
pixel gross	680K
video actual	340K Pixels

Convenience

steadyshot image stabilization	Yes
minimum illumination	5 Lux
low light capability	NightShot Plus system

Inputs and Outputs

analog audio/video outputs	Yes (Multi A/V)
digital audio/video inputs	Yes (via i.LINK)
digital audio/video outputs	Yes (via i.LINK)

Display

lcd size	2.5"
lcd resolution	123K Pixels
viewfinder resolution	123K Pixels

Optics and Lens

35mm equivalent	44-880mm (4:3), 48-960mm (16:9)
aperture	f1.8-3.1
optical zoom	20X

Power

power consumption	1.8W/2.1W (VF/LCD)
battery type	InfoLITHIUM (NP-FP30)
power requirements	7.2V (battery), 8.4V (AC Adaptor)

Dimensions and Weight

weight	14 oz (420g)
measurements	2 5/8" x 3 1/8" x 4 1/2" (65 x 79 x 113mm)