HCD-EC68/EC78
7
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
1 Press CD
to select the CD function.
2 Press PLAY MODE
repeatedly until “PGM” appears
while the player is stopped.
3 Press DISC SKIP
to select a disc.
4 Press / (or
/
on the unit)
repeatedly until the desired track number appears.
When programming MP3 les, press
+/–
repeatedly to select the desired folder, and then select
the desired le.
Selected track or le number
Total playing time of the
selected track
5 Press ENTER
to add the track or le to the
program.
6 Repeat steps 3 through 5 to program additional
tracks or les, up to a total of 25 tracks or les.
7 To play your program of tracks or les, press (or
CD on the unit)
.
e program remains available until you open the disc
tray. To play the same program again, select the CD
function, and then press (or CD on the unit)
.
To cancel Program Play
Press PLAY MODE
repeatedly until “PGM”
disappears while the player is stopped.
To delete the last track or le of the program
Press CLEAR
while the player is stopped.
To view program information, such as total
track number of the program
Press DISPLAY
repeatedly.
Presetting radio stations
You can preset your favourite radio stations and tune
them in instantly by selecting the corresponding preset
number.
1 Tune in the desired station (See “Listening to the
radio”
)
.
2 Press TUNER MEMORY
.
Preset number
3 Press +/– (or TUNING +/– on the unit)
repeatedly
to select your desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4 Press ENTER
.
5 Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. e
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6 To call up a preset radio station, press TUNING
MODE
repeatedly until “PRESET” appears, and
then press +/– (or TUNING +/– on the unit)
repeatedly to select the desired preset number.
Other Operations
Recording onto a tape (Except for the
UK model)
Use a TYPE I (normal) tape only.
You can record just the portions you like from a sound
source, including connected audio components.
Use buttons on the unit to control tape recording.
1 Insert a recordable tape into the cassette holder
with the side you want to record facing up.
2 Prepare the recording source.
Select the desired source to record.
Place the disc you want to record and press DISC
SKIP
to select a disc.
When recording a folder from an MP3 disc, press
PLAY MODE
repeatedly to select “ ,” and then
press
+/–
repeatedly to select the desired
folder.
To record only your favourite CD tracks or MP3
les in your desired order, perform steps 2 to 5 of
“Creating your own CD program.”
3 Start recording.
Press (record)
, and then start playing the
desired recording source.
e CD starts playing automatically aer 10 seconds
have passed.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the
noise.
While recording, you cannot listen to other sources.
To stop recording
Press
.
Tip
We recommend that you press
rst, and then press
to
avoid noise being recorded when you stop recording.
Using the timers
e system oers two timer functions. If you use both
timers, the Sleep Timer has priority.
Use buttons on the remote to use the timer functions.
Sleep Timer:
You can fall asleep to music. is function works even if
the clock is not set.
Press SLEEP
repeatedly. If you select “AUTO,” the
system automatically turns o aer the current disc or
tape stops or in 100 minutes.
If the tape deck is still playing or recording at the set
time, the system turns o aer the tape deck stops.
Play Timer:
You can wake up to CD or tuner at a preset time.
Make sure you have set the clock.
1 Prepare the sound source.
Press VOLUME +/– (or turn VOLUME on the unit)
to adjust the volume.
To start from a specic CD track or MP3 le, create
your own CD program.
2 Press CLOCK/TIMER SET
.
3 Press /
repeatedly to select “PLAY SET,”
then press ENTER
.
“ON TIME” appears, and the hour indication ashes.
4 Set the time to start playback.
Press /
repeatedly to set the hour, then
press ENTER
.
e minute indication ashes. Use the procedure
above to set the minutes.
5 Use the same procedure as in step 4 to set the time
to stop playback.
6 Select the sound source.
Press /
repeatedly until the sound source
you want appears, then press ENTER
. e display
shows the timer settings.
7 Press
to turn o the system.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT
, press /
repeatedly until “PLAY SEL” appears, then press ENTER
.
To cancel the timer
Repeat the same procedure as above until “OFF” appears,
and then press ENTER
.
To change the setting
Start over from step 1.
Tip
e Play Timer setting remains as long as the setting is not cancelled
manually.
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
To Next Page
Loading...
Need help?
General
