57
a Item display
This is the name of the parameter being set.
b Input display
This displays the character string being entered.
c Close button
This button closes the keyboard window.
d Caps Lock button
This button enables input of upper case alphabetic
characters.
You can enter items to be displayed on the control panel
display using lowercase letters, but these will be converted
to uppercase for display.
e Shift button
This button selects the characters on the shifted side of
buttons. [Shift] is released when you enter a character.
f BS (backspace) button
This button clears the character immediately before the
cursor.
g Line feed button
After pressing [Shift], press this button to advance by one
line on the control panel display. The input display
represents a line feed as “|”.
h Enter button
This button sets the input string as a parameter value.
If the value is set correctly, the keyboard window closes. If
the value is not set correctly, the display color changes.
i Space button
This button enters a space character.
j Clear button
This button clears all of the characters in the input string.
k Del (delete) button
This button clears the character immediately after the
cursor.
l Home button
This button moves the cursor to the start of the character
string.
m Left button
This button moves the cursor one character to the left.
n Right button
This button moves the cursor one character to the right.
o End button
This button moves the cursor to the end of the character
string.
a Item display b Input display
f BS button
c Close button
d Caps Lock button
i Space button
m Left button
k Del button n Right button
h Enter button
g Line feed button
j Clear button
e Shift button
l Home button
o End button
Note
To Next Page
Loading...
Need help?
General
