Sony LMD1530W User Manual

Installing to the Rack
11
output of an audio signal. Connect them to the
audio input/output jacks on equipment such as a
VCR.
g PARALLEL REMOTE connector (modular
connector, 8-pin)
Forms a parallel switch and controls the monitor
externally.
For details on the pin assignment and factory setting
function assigned to each pin, see page 23.
CAUTION
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
h LINE connectors
Line input connectors for Y/C separate, composite video
and audio signals and their loop-through output
connectors.
Press the LINE button to monitor the signal input
through these connectors.
If you input signals to both Y/C IN and VIDEO IN, the
signal input to the Y/C IN is selected.
Y/C IN/OUT (4-pin mini-DIN)
These are the input/output connectors for a Y/C
separate signal. Connect them to the Y/C separate
input/output connectors on equipment such as a
VCR, video camera, or another monitor.
VIDEO IN/OUT (BNC)
These are the input/output connectors for a
composite video signal. Connect them to the
composite video input/output connectors on
equipment such as a VCR, video camera, or another
monitor.
AUDIO IN/OUT (phono jack)
These are the input/output jacks for an audio signal.
Connect them to the audio input/output jacks on
equipment such as a VCR.
i AC IN socket
Connect the supplied AC power cord.
Installing to the Rack
1 Remove the screws (4) to remove the stand.
2 Attach the unit to the rack using the mounting
bracket.
1

Sony LMD1530W Specifications

General

Brand	Sony
Model	LMD1530W
Category	Monitor
Language	English