Sony MDR-1000X User Manual

Help Guide
Wireless Noise Canceling Stereo Headset
MDR-1000X
Receiving a call
You can enjoy a hands-free call with a smartphone or mobile phone that supports the BLUETOOTH profile HFP (Hands-free
Profile) or HSP (Headset Profile), via a BLUETOOTH connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
Operations may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied with your
smartphone or mobile phone.
Ring tone
When an incoming call arrives, a ring tone will be heard from the headset, and the indicator (blue) flashes quickly.
You will hear either of following ring tones, depending on your smartphone or mobile phone.
Ring tone set on the headset
Ring tone set on the smartphone or mobile phone
Ring tone set on the smartphone or mobile phone only for a BLUETOOTH connection
Connect the headset to a smartphone or mobile phone beforehand.
1
When you hear a ring tone, double-tap the touch sensor lightly (about 0.4-second interval) and receive
the call.
When an incoming call arrives even while you are listening to music, playback pauses and a ring tone will be heard from the
headset.
A: Microphone
If no ring tone is heard via the headset
The headset may not be connected with the smartphone or mobile phone with HFP or HSP. Check the connection status
on the smartphone or mobile phone.
2
94

Sony MDR-1000X Specifications

General

Battery recharge time	4 h
Continuous audio playback time	20 h
Manual	Yes
Voice coil type	CCAW
Connectivity technology	Wired & Wireless
Connector contacts plating	Gold
Impedance	46 Ω
Driver type	Dynamic
Driver unit	40 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	4 - 40000 Hz
Headphone sensitivity	103 dB
Cable length	1.5 m
Headset type	Binaural
Product type	Headset
Product color	Beige
Wearing style	Head-band
Recommended usage	Calls/Music
Quantity	1
Microphone type	Built-in

Weight and Dimensions

Weight	275 g