Help Guide
Wireless Noise Canceling Stereo Headset
MDR-1000X
Pairing cannot be done.
Bring the headset and the BLUETOOTH device within 1 m(3 feet) from each other.
When you turn on the headset for the first time after purchasing, initializing, or repairing it, the headset enters pairing mode
automatically. Pair the headset with a BLUETOOTH device. When you want to pair a 2nd or subsequent device, press and
hold the
button of the headset for about 7 seconds to enter pairing mode.
When you pair the headset with devices again after initializing or repairing the headset, information for pairing with the
headset remaining on the iPhone or other device may prevent you from pairing them successfully. In this case, delete the
pairing information of the headset from the device, and then pair them again.
Related Topic
About the indicator
How to make a wireless connection to BLUETOOTH devices
Initializing the headset to restore factory settings
4-595-263-11(1) Copyright 2016 Sony Corporation
To Next Page
Need help?
General
Weight and Dimensions
