Help Guide
Wireless Noise Canceling Stereo Headset
MDR-1000X
Using the noise canceling function
If you use the noise canceling function, you can enjoy music without being disturbed by ambient noise.
To turn off the noise canceling function
Press the NC button. The indicator (green) on the NC button flashes. You hear voice guidance “Noise canceling off”. (To turn
on the function, press the NC button again. You hear voice guidance “Noise canceling on”.)
Note
When the headset is connected with the headphone cable and the noise canceling function is turned on, the indicator on the button turns off.
Hint
If you use the noise canceling function with a BLUETOOTH connection, the noise canceling function is on even if you connect the supplied
headphone cable.
When you are using the supplied headphone cable, press and hold the
button for about 2 seconds to turn off the headset. You can use the
headset as ordinary wired headphones.
Press and hold the button for about 2 seconds when the headset is turned off to turn on the
headset.
You hear voice guidance “Power on”.
The noise canceling function is turned on automatically when you turn on the headset.
When the noise canceling function is turned on, the indicator (green) on the NC button lights up.
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
