Sony MDR-1000X User Manual

Help Guide
Wireless Noise Canceling Stereo Headset
MDR-1000X
How to make a wireless connection to BLUETOOTH devices
You can enjoy music and hands-free calling with the headset wirelessly by using your device’s BLUETOOTH function.
When connecting a device for the first time via BLUETOOTH, device registration (pairing) is needed.
Device registration (pairing)
The operation to register a device to be connected is called device registration (pairing).
If the device to be connected does not support the one-touch connection (NFC), operate the headset and the device to perform
device registration (pairing).
If the device supports one-touch connection (NFC), you can just touch to perform device registration (pairing) and establish a
BLUETOOTH connection.
Connecting the headset to a registered (paired) device
When the device is registered, it is not necessary to register it again. Connect to it with an appropriate method.
For details, see “Making connections.”
4-595-263-11(1) Copyright 2016 Sony Corporation
2

Sony MDR-1000X Specifications

General

Battery recharge time	4 h
Continuous audio playback time	20 h
Manual	Yes
Voice coil type	CCAW
Connectivity technology	Wired & Wireless
Connector contacts plating	Gold
Impedance	46 Ω
Driver type	Dynamic
Driver unit	40 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	4 - 40000 Hz
Headphone sensitivity	103 dB
Cable length	1.5 m
Headset type	Binaural
Product type	Headset
Product color	Beige
Wearing style	Head-band
Recommended usage	Calls/Music
Quantity	1
Microphone type	Built-in

Weight and Dimensions

Weight	275 g