Tip
If
you know the frequency
of
the station you want to
listen
to,
press and hold
(SEEK)
-/+
to locate the
approximate frequency, then press
(SEEK)
-/+
repeatedly to fine adjust to the desired frequency
(manual tuning).
Bluetooth
function
Bluetooth
operations
To
use the Bluetooth function, the following
procedure is necessary.
oPairing
When connecting Bluetooth devices for the
first time, mutual registration
is
required. This
is called "pairing." This registration (pairing)
is
required only for the first time, as this unit
and the other devices will recognize each
other automatically from the next time.
You
can pair up to 9 devices. (Depending
on
the
device, you may need to input a passcode for
each connection.)
e Connection
Sometimes pairing allows to connect
automatically.
To
use the device after pairing
is made, start the connection.
e Handsfree talking/Music streaming
You
can talk handsfree and listen to music
when the connection is made.
Pairing
First, register ("pair") a Bluetooth device
(cellular phone, etc.) and this unit with each
other.
You
can pair up to 9 devices. Once pairing
is established, there is no need for pairing again.
1 Place the Bluetooth device within 1 m
(3
tt) of this unit.
2 Press and hold
@D
until
"0
" flashes
(about 5 seconds).
The unit enters pairing standby mode.
(
------------,:',.1.1.-
.
~p
flashing
3 Set the Bluetooth device to search for
this unit.
A list
of
detected devices appears in the
display
of
the connecting device. This unit
is
displayed as "XPLOD"
on
the connecting
device.
•
continue to next page -
11
To Next Page
Loading...
Need help?
General
Weight and Dimensions
