CD/MD
changer
Selecting the changer
1 Press
(SOU
RCE)
repeatedly until
"CD"
or
"MD"
appears.
2 Press
(MODE)
repeatedly until the desired
changer appears.
Unit number Disc number
Rotary
commander
RM-X4S
Attaching the label
Attach the indication label depending
on
how
you mount the rotary commander.
Playback starts.
Skipping albums and discs
1 During playback, press
(DIm
(ALBUM-I
+).
Repeat and shuffle play
1 During playback, press ® (REP)
or
ill
(SHUF) repeatedly until the desired setting
appears.
•
OFF
VOL
SOURCE
ATT
Changing the operative direction
The operative direction
of
the controls is factory-
set as shown below.
The following controls
on
the rotary commander
require a different operation from the unit.
• PRESET/DISC control
The same as
(DIm
(ALBUM -1+)
on
the
unit (push in and rotate).
• VOL (volume) control
The same as the volume control dial
on
the unit
(rotate).
• SEEKIAMS control
The same as
(SEEK)
-1+
on
the
unit (rotate,
or
rotate and hold).
Location of controls
The
corresponding buttons on the rotary
commander control the same functions as those
on
this unit.
tracks in the changer inrandom
order.
disc repeatedly.
track repeatedly.
disc in random order.
To
play
Press, then press again within 2
seconds
and
hold.
Press repeatedly.
Press and hold, then press again
within 2 seconds.
(DIe%)
(ALBUM -1+)
Press and hold.
e:;
DISC
e:; TRACK
SHUF DISC
SHUF
CHANGER
Select
album
continuously
discs
discs
continuously
album
To
skip
* When one
or
more CD changers,
or
two
or
more MD
changers are connected.
To return to normal play mode, select "e:;
OFF"
or
"SHUF
OFF."
Tip
"SHUF ALL" will
not
shuffle tracks between CD units
and
MD
changers.
SHUF
ALL*
tracks in all units in random
order.
To
increase
To
decrease
If
you need to mount the rotary commander
on
the right hand side
of
the steering column, you
can
reverse the operative direction.
continue
to
next page
--
17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
