Other functions
Changing
the
sound
settings
Adjusting
the
sound
characteristics
1 Press
the
select
button
repeatedly
until
the
desired
item appears.
2 Rotate
the
volume
control
dial
to
adjust
the
selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
"e"
indicates the default settings.
EQ3
To
select
an
equalizer type:
"XPLOD"
(e),
"VOCAL," "EDGE," "CRUISE," "SPACE,"
"GRAVITY,"
"CUSTOM"
or
"OFF."
LOW*1, MID*1,
HI*1
(page 15)
To
customize the equalizer curve.
BAL
(Balance)
To adjust the balance between the right and left
speakers: "RIGHT-IO" -
"CENTER"
(e)-
"LEFT-l0"
FAD (Fader)
To adjust the balance between the front and rear
speakers: "FRONT-l
0" -
"CENTER"
(e)-
"REAR
-10"
SUB*2 (Subwoofer volume)
To
adjust the subwoofer volume: "+10
dB"
-
"0
dB"
(e) -
"-10
dB"
("ATT" is displayed at the lowest setting.)
AUX*3 (AUX level)
To
adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level:
"+
18
dB"
-
"0
dB"
(e)-
"-8
dB"
BTA*4
To
adjust the volume level for each connected
Bluetooth audio device. This setting negates the
need to adjust the volume level between sources
(page
14).
Adjustable level: "+
18
dB"
-
"0
dB"
(e)-
"-8
dB"
Customizing the equalizer curve
-EQ3
"CUSTOM"
of
EQ3 allows you to make your
own equalizer settings.
1 Select a source, then
press
the
select
button
repeatedly
to
select
"EQ3."
2 Rotate
the
volume
control
dial
to
select
"CUSTOM."
3 Press
the
select
button
repeatedly
until
"LOW,"
"MID"
or
"HI"
appears.
4 Rotate
the
volume
control
dial
to
adjust
the selected item.
The volume level is adjustable in 1 dB steps,
from
-10
dB to +
10
dB.
Repeat steps 3 and
4 to adjust the equalizer
curve.
To
restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
Adjusting
setup
items
-
SET
1 Press and
hold
the
select
button.
The setup display appears.
2 Press
the
select
button
repeatedly
until
the
desired
item appears.
3 Rotate
the
volume
control
dial
to
select
the
setting
(example
"ON"
or
"OFF").
4 Press and
hold
the
select
button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can
be
set (follow the page
reference for details):
"e"
indicates the default settings.
CLOCK-ADJ (Clock Adjust) (page 6)
•
*1 When EQ3 is activated.
*2 When the audio output is set
to
"SUB" (page 16).
*3
When
AUX
source is activated.
*4 When Bluetooth audio source is activated
(page
14).
BEEP
To
set "BEEP-ON" (e) or "BEEP-OFF."
continue
to
next
page
-+
15
To Next Page
Loading...
Need help?
General
Weight and Dimensions
