18
Menu Operations
Display and Entry Method for Names
The display mode for names of sources and destinations is
automatically set depending on whether the primary
station menu item “J: NAME STYLE” is set to Type +
Num or DESCRIP.NAME.
When DESRIP.NAME is set, you can confirm the
description name using menu item S: DISPLAY
DESCRIPTION NAME.
In Type + Num (type and number) mode
• The name of a source or destination is composed of a
type name and a number.
• To set or change the name, select a type name from the
list in the lower portion of the display, then enter a
number using the numeric keys.
In DESCRIP.NAME (description name)
mode
• The name of a source or destination is displayed with a
description name.
• You can set or change the name in the same manner as
in Type + Num mode (default). Pressing [Ctrl]-[N]
enables you to directly enter the description name using
the alphabetic and numeric keys.
When not specially mentioned, the setting displays in Type
+ Num mode are shown as examples in this manual.
Note
To use the descriptions, the unit must receive the
description data from the terminal in advance. The
received description data can be checked using menu item
S.
Menu Item C: SET SWITCHER ID (for
AUX mode)
Purposes
Menu item C sets the unit whose source assignment is to
be read and set to the source select buttons in AUX mode
using the ID. The same settings of the CCP-8000 Center
Control Panel, which is selected on this menu, will be
assigned to the select buttons automatically.
Setting procedure
1
Press [C] on the selection display to select menu item
C.
The setting display of menu item C appears.
Setting display (example)
2
Press [Enter].
3
Enter the ID number (1 through 254) in decimal with
the numeric keys.
4
Press [Enter].
The setting is fixed.
To return to the selection display of the Setup
Menu
Press [Ctrl]-[E] on each setting display.
To return to the primary station menu
Press [Ctrl]-[D].
SONY ROUTING SYSTEM SETUP MENU MKS-8082 V1.00 STATION NUMBER 6
SET SWITCHER ID
SWITCHER ID = 002
Ctrl-E : MENU Ctrl-D : RETURN
To Next Page
Loading...
Need help?
General
