24
Preparing the PSP® system for use
Before using the PSP® system for the first time after purchase, you must follow
these steps to charge the battery.
1 Remove the battery cover.
2 Insert the Battery Pack.
3 Replace the battery cover.
Preparing the PSP® system for use
Getting started 1: Inserting the Battery Pack
UMD
PUS
H
Hold down the PUSH button and slide
the battery cover open.
UMD
PUS
H
Align the bottom surface of the
Battery Pack with the system to
attach.
UMD
PUS
H
2 Slide the battery cover in the
direction of the arrow until it
locks firmly into place.
1 Align the tabs.
To Next Page
Loading...
Need help?
General
