EasyManuals Logo
Home>Sony>Security Camera>SNC-VB600B

Sony SNC-VB600B User Manual

Sony SNC-VB600B
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
Administrating the Camera
Setting the Security — Security Menu
49
802.1X Tab
Configure the wired port-based authentication in
compliance with the 802.1X standard.
Notes
To use the 802.1X authentication function, you need
knowledge of the 802.1X authentication and digital
certificate. To establish an 802.1X network, you need
to configure the authenticator, authentication server
and other elements. For details on these settings, refer
to the manual of the corresponding equipment.
When using the 802.1X authentication function,
always configure the settings after setting the date and
time of the camera. If the date and time are incorrect,
port authentication may not be performed correctly.
System configuration of 802.1X
network
The following figure shows a general system
configuration of an 802.1X network.
Supplicant
A supplicant is a device that connects to the
authentication server to join the network. This camera
serves as a supplicant in the 802.1X network. The
supplicant can enter the 802.1X network after
appropriate authentication by the authentication server.
Authenticator
An authenticator forwards certificate request data or
response data that the supplicant or authentication server
issues to the other party. Normally a hub, router or
access point serves as an authenticator.
Authentication server
An authentication server has a database of connecting
users and verifies if the supplicant is a valid user or not.
It can also be called RADIUS server.
CA (Certificate Authority)
A CA issues and manages certificates of the
authentication server (CA certificates) and user
certificates. The CA is essential for certificate-based
user authentication. Normally a CA is located inside an
authentication server.
Note
This camera supports EAP mode in which the supplicant
and the server authenticate using the certificate. This
mode requires a CA to issue the certificate.
Common setting
Enable
Select the checkbox to enable the 802.1X authentication
function.
Supplicant
(camera)
Authenticator
(hub or router)
Authentication
server + CA

Table of Contents

Other manuals for Sony SNC-VB600B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony SNC-VB600B and is the answer not in the manual?

Sony SNC-VB600B Specifications

General IconGeneral
BrandSony
ModelSNC-VB600B
CategorySecurity Camera
LanguageEnglish

Related product manuals