14
Commands
Command List (1/8)
Number in ( ) is MENU display values.
Command Set Command Command Packet Comments
EXPOSURE MODE - 8x 01 04 39 0p FF p: 0=Full Auto, 3=Manual, A=Shutter
Priority, B=Iris Priority
IRIS Reset 8x 01 04 0B 00 FF To return to 19 (F2.0) value
Up 8x 01 04 0B 02 FF Open
Down 8x 01 04 0B 03 FF Close
Direct 8x 01 04 4B 00 00 0p
0p FF
pp: Refer to the VISCA Command
Setting Values (IRIS) section
GAIN Reset 8x 01 04 0C 00 FF To return to 01 (0 dB) value
Up 8x 01 04 0C 02 FF
Down 8x 01 04 0C 03 FF
Direct 8x 01 04 4C 00 00 0p
0p FF
pp: Refer to the VISCA Command
Setting Values (GAIN) section
GAIN LIMIT Direct 8x 01 04 2C 0p FF When high-sensitivity mode is set to
Off
p: 4 (9 dB) - D (36 dB)
When high-sensitivity mode is set to
On
p: 4 (21 dB) - D (48 dB)
GAIN POINT On/Off 8x 01 05 0C 0p FF p: 2=On, 3=Off
Position 8x 01 05 4C 0p 0p FF When high-sensitivity mode is set to
Off
p: 4 (9 dB) - D (36 dB)
When high-sensitivity mode is set to
On
p: 4 (21 dB) - D (48 dB)
HIGH SENSITIVITY On/Off 8x 01 04 5E 0p FF p: 2=high-sensitivity mode On,
3=high-sensitivity mode Off
SHUTTER Reset 8x 01 04 0A 00 FF Return to the default value
depending on the frame rate of
video output
Up 8x 01 04 0A 02 FF Fast
Down 8x 01 04 0A 03 FF Slow
Direct 8x 01 04 4A 00 00 0p
0p FF
pp: Refer to the VISCA Command
Setting Values (SHUTTER/MIN
SHUTTER) section
MAX SHUTTER Direct 8x 01 05 2A 00 0p 0p
FF
pp: Refer to the VISCA Command
Setting Values (MAX SHUTTER)
section
MIN SHUTTER Direct 8x 01 05 2A 01 0p 0p
FF
pp: Refer to the VISCA Command
Setting Values (SHUTTER/MIN
SHUTTER) section
AUTO SLOW
SHUTTER
Direct 8x 01 04 5A 0p FF p: 2=On, 3=Off
AE SPEED Direct 8x 01 04 5D pp FF pp: 01 - 30