Sony SRG-X400 Command List

27
Inquiry Command List (6/6)
Number in ( ) is MENU display values.
*1
Only available for BRC-X400/X401.
*2
Aligned to the right end when IMAGE FLIP is Off, and aligned to the left end when IMAGE FLIP is On.
Inquiry Command Inquiry Packet Reply Packet Comments
SYSTEM VIDEO FORMAT
SELECTABLE
8x 09 7E 04 31 FF y0 50 0p FF Whether the setting can be
changed by the command of the
Video output method (video
format) or not.
p: 2=Available, 3=Not available
VIDEO FORMAT
SELECT
8x 09 7E 04 32 FF y0 50 0p 0p FF pp: Video Format
For pp, refer to the section of the
Video output method (video
format) of VISCA Command
Setting Values
VIDEO FORMAT
STATUS
8x 09 7E 04 33 FF y0 50 0p 0p FF Current status of the Video
output method (video format)
pp: Video Format
For pp, refer to the section of the
Video output method (video
format) of VISCA Command
Setting Values
H PHASE
*1
8x 09 7E 01 3E FF y0 50 00 0p 0p 0p
FF
ppp: Phase difference adjusted
value (000 - 3BF)
IR RECEIVE 8x 09 06 08 FF y0 50 0p FF p: 2=On, 3=Off
IMG FLIP 8x 09 04 66 FF y0 50 0p FF p: 2=On, 3=Off
COLOR BAR
*1
8x 09 04 7D FF y0 50 0p FF p: 2=Color Bar On, 3= Color Bar
Off
OVERLAY NAME
*1
8x 09 7E 04 77 FF y0 50 0p FF p: 2=Overlay Name On,
3=Overlay Name Off
CAMERA ID 8x 09 04 22 FF y0 50 0p 0p 0p 0p
FF
pppp: Camera ID (0000 - FFFF)
CAMERA
GENERATION
8x 09 7E 04 30 FF y0 50 0h 0k 0m 0n
0p 0q 0r 0s 0t 0u
uu 0v vv FF
h: Number of camera generation
k-t: 0 fixed
0uuu: Model ID
0vvv: Model ID of the similar
model when operating with a
remote controller
HDMI COLOR SPACE 8x 09 7E 01 03 FF y0 50 0p FF p: 0=YCbCr, 1=RGB
MENU ON/OFF 8x 09 06 06 FF y0 50 0p FF p: 2=On, 3=Off
OSD 8x 09 7E 04 76 0p
FF
y0 50 0q FF p: 0=SDI, 1=HDMI
q: 2=OSD On, 3=OSD Off
POWER ON/STANDBY 8x 09 04 00 FF y0 50 0p FF p: 2=On, 3=Standby
STANDBY MODE 8x 09 7E 04 50 FF y0 50 0p FF p: 2=Side (When Standby is
executed, move the Pan to the
end point
*2
and the Tilt to 0°),
3=Neutral
SOFTWARE
VERSION
(CAM_VersionInq)
- 8x 09 00 02 FF y0 50 pp pp qq qq
rr rr 0s FF
pppp: Vendor ID
qqqq: Model Code
rrrr: ROM version
s: Socket Number

Sony SRG-X400 Specifications

General

Type	IP security camera
PTZ modes	Digital PTZ
PTZ control	Yes
Placement supported	-
Connectivity technology	Wired
Form factor	Dome
Mounting type	Ceiling/Pole
Product color	White
LED indicators	LAN, Power
Pan range	-170 - 170 °
Pan speed	300 °/sec
White balance	Auto, Indoor, Manual, One push, Outdoor
Tilt angle range	-20 - 90 °
Camera shutter speed	1/1 - 1/10000 s
Minimum illumination	1.6 lx
Sensor type	Exmor
Number of sensors	1
Optical sensor size	1/2.5 \
Focus	Motorized/Manual
Digital zoom	40 x
Focal length range	4.4 - 88 mm
Maximum aperture number	3.8
Minimum aperture number	2
Closest focusing distance	0.08 m
LED type	IR
Bit rate control	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)
Total megapixels	8.5 MP
Gain control type	Auto/Manual
Maximum resolution	3840 x 2160 pixels
Supported video modes	720p, 1080i, 1080p, 2160p
Video compression formats	H.264, H.265
Supported graphics resolutions	640 x 360, 720 x 480, 720 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160
Voice codecs	AAC
Audio output channels	2 channels
Streaming method	Multicast
Supported network protocols	IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, UPnP, VISCA over IP
DC output voltage	12
Power source type	DC, PoE
Power consumption (typical)	25.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Depth	200.2 mm
Width	158.4 mm
Height	177.5 mm
Weight	1800 g