Help Guide
Wireless Speaker
SRS-XP700 / SRS-XP500
Selecting the BLUETOOTH audio streaming playback quality (Codec)
The “Priority on sound quality” and “Priority on sound connection” modes are available as options for the playback quality
of BLUETOOTH audio streaming. “Priority on sound quality” enables you to perform playback settings of, not only SBC,
but also AAC and LDAC, so that you can enjoy high quality sound via BLUETOOTH connection, whereas “Priority on
sound connection” provides you more stable BLUETOOTH audio streaming. “Priority on sound quality” is the default
setting.
Supported Codecs
Priority on sound quality (default setting): Optimal codec is automatically selected from AAC, LDAC, and SBC.
Priority on sound connection: SBC is selected.
Connect the speaker to an AC outlet with the supplied AC power cord (mains lead).
Note
Do not turn on the speaker. Before changing the sound quality, make sure that the speaker is turned off.
1
Change the sound quality.
When using the buttons of the speaker
When using “Sony | Music Center”
2
While holding the + (volume) button, press the
(BLUETOOTH) button until the (BLUETOOTH) indicator
flashes in blue.
When the setting is changed to the “Priority on sound connection” mode, the
(BLUETOOTH) indicator flashes
3 times in blue.
When the setting is changed to the “Priority on sound quality” mode, the
(BLUETOOTH) indicator flashes
twice in blue.
1.
Press the (power) button to turn on the speaker.
Hint
Speaker operations with “Sony | Music Center” are available even while the speaker is running on power from the
rechargeable built-in battery.
1.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
