Sony STR-DG710 Operating Instructions

20
US
The image from a video component connected
to this receiver can be displayed on a TV
screen.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Note
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
Tips
• You can watch the selected input image when you
connect the MONITOR OUT jack to a TV or
projector.
• The sound of the TV is output from the speakers
connected to the receiver if you connect the audio
output jack of the TV and the TV IN jacks of the
receiver.
Connecting a TV
DIGITAL
(ASSIGNABLE)
DMPORT
OPTICAL
SAT
IN
DVD
IN
COAXIAL
ANTENNA
VIDEO 1
IN
AM
HDMI
XM
DVD IN VIDEO 2/BD IN OUT
SA-CD / CD
IN
SAT
AUDIO IN
VIDEO IN
DVD
VIDEO IN
VIDEO 1
AUDIO OUT
VIDEO OUT
AUDIO IN
AUDIO OUT
VIDEO IN
L
R
L
R
SUB
WOOFER
SPEAKERS
FRONT B
FRONT A
L
L
R
R
SURROUND
L
R
CENTER
SURROUND BACK
VIDEO OUT
MONITOR
TV
IN
R
SAT IN
COMPONENT VIDEO
DVD IN VIDEO 1 IN
Y
P
B/CB
PR/CR
MONITOR OUT
L
TV
AB C
A Audio cord (not supplied)
B Video cord (not supplied)
C Component video cord (not supplied)
Audio signals Video signals

Sony STR-DG710 Specifications

General

RMS rated power	600 W
Audio output channels	5.1 channels
Supported radio bands	AM, FM
Radio Data System (RDS)	Yes
I/O ports	AV in/out Video in/out HDMI in/out D-Sub DM
Connectivity technology	Wired
Headphone outputs	1
Product color	Black
Dimensions (WxDxH)	430 x 157.5 x 310 mm

Weight and Dimensions

Weight	7800 g