You can check the current software version of the receiver.
1. Select [Setup] - [System Setup] from the home menu.
2. Check [Software Version].
[112] Adjusting Settings System Setup
Updating the software using the USB flash drive (USB
Update)
Update the receiver software using the USB flash drive.
1. Copy the file for updating to the top level directory (just under the root directory) of the
USB flash drive.
2. Connect the USB flash drive to the SETTING (USB) port of the receiver.
3. Select [Setup] - [System Setup] from the home menu.
4. Select [USB Update] to enter.
[UPDATING...XXX%] appears on the display panel while updating. When the update
completes, receiver will restart automatically.
[113] Adjusting Settings System Setup
Setting the tuner (Tuner Setup)
Configure the FM mode and Name Input settings. This function only works while the [FM
TUNER] or [AM TUNER] input is selected.
For details, see “Selecting the FM reception method (FM Mode)” or “Naming preset stations
(Name Input).”
[114] Adjusting Settings Install Setup
To Next Page
Loading...
