Name: Sony STR-ZA1000ES
Brand: Sony
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Front speaker (Left)

Front speaker (Right)

Center speaker

Surround speaker (Left)

Surround speaker (Right)

Subwoofer

Zone 2 speaker (Left)

Zone 2 speaker (Right)

Hint

As the subwoofer does not emit highly directional signals, you can place it wherever you

want.

How to connect speaker cables

Connect speaker cables as illustrated below.

Enjoying Video and Sound2
Configuring Video and Sound Settings3
Saving and Recalling Various Settings for the Receiver (Custom Preset)3
Using Other Features3
Adjusting Settings4
Zone Setup6
System Setup6
Easy Setup6
Using the Menu on the Display Panel7
Parts and Controls7
Troubleshooting8
Error Messages8
Procedure to Start Using the Receiver9
Function for Conversion of Video Signals11
Digital Audio Formats Supported by the Receiver12
Notes on Connecting Cables13
Using HDMI Connections14
HDMI Features14
Installing Speakers15
Connecting Speakers17
Connecting Devices with HDMI Jacks26
Connecting Devices with Jacks Other than HDMI Jacks28
Connecting the Antennas (Aerials)30
Connecting Another Amplifier in Zone30
System Requirements for a Wired LAN Connection32
Inserting Batteries into the Remote Control34
Turning on the Receiver35
Setting up the Receiver Using the Easy Setup36
Using the Menu on the TV Screen37
Enjoying Video/Sound from the Connected Device37
Listening to Fm/Am Radio39
Presetting FM/AM Radio Stations (Preset Memory)40
Tuning to a Station Directly (Direct Tuning)41
Changing the am Tuning Scale42
Selecting a Sound Field (Sound Field)42
Resetting Sound Fields to the Default Settings43
Adjusting the Equalizer (Equalizer)43
Enjoying High-Fidelity Sound (Pure Direct)46
What Is "BRAVIA" Sync55
Preparing for "BRAVIA" Sync55
Enjoying Sound of TV Broadcasts from the Receiver57
Switching the Monitors that Output the HDMI Video Signals57
Switching between Digital and Analog Audio (Input Mode)58
Using Other Video/Audio Input Jacks (Input Assign)59
About Custom Preset61
Recalling the Settings Saved to the Scene61
Saving the Settings to a Preset62
Items for Which You Can Save Settings and the Default Values for each Item62
Using Bi-Amplifier Connections65
Using the Sleep Timer (Sleep)66
Viewing Information on the Display Panel66
Changing the Assignment and Display for the Input Jacks67
Changing the Name for each Input (Name)69
Automatic Phase Matching71
Selecting the Auto Calibration Type (Calibration Type)72
Selecting the Speaker Pattern (Speaker Pattern)72
Outputting a Test Tone from each Speaker (Test Tone)75
Setting the Crossover Frequency of the Speakers (Crossover Frequency)76
Selecting the Unit of Measurement (Distance Unit)78
Checking the Network Information (Information)79
Selecting the HD-D.C.S. Effect Type (HD-D.C.S. Type)83
Subwoofer Low Pass Filter85
Synchronizing Audio with Video Output (A/V Sync)86
Selecting the Language of Digital Broadcasts (Dual Mono)86
Compressing the Dynamic Range (Dynamic Range Compressor)87
Up-Converting Video Signals to 4K (4K Scaling)87
Controlling HDMI Devices (Control for HDMI)88
Passing HDMI Signals through (Pass Through)89
Setting the HDMI Audio Signal Output of Connected Devices (Audio Out)89
Setting the Level of the Subwoofer (Subwoofer Level)91
Speeding up the Display When Switching the HDMI Input (Fast View)93
Selecting the Language (Language)97
Tuning On/Off the Display for the Volume Level or Sound Field (Auto Display)97
Setting Standby Mode (Auto Standby)97
Checking the Software Version (Software Version)99
Displaying a Test Screen (Test Picture)104
Operating the Receiver with the Menu on the Display Panel105
Reverting to the Factory Default Settings107
Front Panel107
Indicators on the Display Panel112
Remote Control114
Specifications117
Amplifier Section117
Fm Tuner Section120
Am Tuner Section120
Video Section120
General Section123
Supplied Accessories123
Software License Information125
Update Failed156
List of Messages after Auto Calibration Measurements156
Network Features Message List157
The Receiver Is Turned off Automatically158
No Image Appears on the TV158
No 3D Image Appears on the TV159
No 4K Image Appears on the TV159
No Image Is Output from the TV When the Receiver Is in Standby Mode159
The GUI Menu Does Not Appear on the TV Screen160
The Display Panel Is Turned off160
No Sound or Only a very Low Level of Sound Is Heard, no Matter Which Device Is Selected160
There Is Severe Humming or Noise161
No Sound or Only a very Low Level of Sound Is Heard from Specific Speakers161
There Is no Sound from a Specific Device162
The Left and Right Sound Is Unbalanced or Reversed163
Dolby Digital or DTS Multi-Channel Sound Is Not Reproduced163
The Surround Effect Cannot be Obtained163
A Test Tone Is Not Output from the Speakers164
A Test Tone Is Output from a Different Speaker than the Speaker Displayed on the TV Screen164
No Sound Is Output from the TV When the Receiver Is in Standby Mode164
The FM Stereo Reception Is Poor165
You Cannot Tune to Radio Stations165
The Fm Reception Is Poor165
A USB Device Is Not Recognized166
A USB Device Cannot be Connected to the USB Port166
An Error Message Appears166
Cannot Connect to the Network166
The Control for HDMI Function Does Not Work167
The Audio Return Channel (ARC) Function Does Not Work167
The Remote Control Does Not Function168
Customer Support Websites169
How to Connect Speaker Cables172
Connecting the Optimizer Microphone174
Selecting the Front Speakers175
Movie Mode178
Home Theatre Control180

Sony STR-ZA1000ES User Manual

Table of Contents

Other manuals for Sony STR-ZA1000ES

Questions and Answers:

Sony STR-ZA1000ES Specifications

Related product manuals

Brand	Sony
Model	STR-ZA1000ES
Category	Receiver
Language	English