Sony STR-ZA1000ES User Manual

[122] Adjusting Settings Reverting to the factory default settings
Reverting to the factory default settings
You can clear all memorized settings and restore the receiver to the factory default settings
by the following procedure. This procedure can also be used to initialize the receiver before
you use it for the first time.
Be sure to use the buttons on the receiver to perform this operation.
1. Turn off the receiver.
2. Hold down (on/standby) on the receiver for 5 seconds.
[MEMORY CLEARING] appears on the display panel for a while, then changes to
[MEMORY CLEARED!] .
Note
Do not turn the receiver off until [MEMORY CLEARED!] appears on the display panel.
[123] Parts and Controls
Receiver
Front panel
With the front cover
1. (on/standby)
Turns the receiver on or sets it to standby mode. The indicator lights up according to
the status of the receiver. Also, the color of the indicator changes depending on the

Sony STR-ZA1000ES Specifications

General

Brand	Sony
Model	STR-ZA1000ES
Category	Receiver
Language	English