4. Press / repeatedly to select the setting you want, then press .
To return to the previous display
Press or RETURN.
To exit the menu
Press AMP MENU.
Note
Some parameters and settings may appear dimmed on the display panel. This means that
they are either unavailable or fixed and unchangeable.
[121] Adjusting Settings
Using the menu on the display panel
Viewing information on the display panel
The display panel provides various information on the status of the receiver, such as the
sound field.
1. Select the input for which you want to check information.
2. Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will change cyclically as follows:
Input name you entered (*1) or default input name, Sound field currently applied (*2) →
Input name you entered (*1) or default input name, Stream information (*3) → Input
name you entered, default input name (*1)
When listening to FM and AM radio
Band, Preset number, Preset station name (*1), Sound field currently applied (*2) →
Band, Preset number, Frequency, Sound field currently applied (*2)
*1
Index name appears only when you have assigned one to the input or preset station. Index name
does not appear if only blank spaces have been entered or it is same as the input name.
*2
[PURE.DIRECT] appears on the display panel when the Pure Direct function is activated.
*3
Stream Information is not displayed when analog signals are input. This may happen even when
digital signals are input.
Note
Characters or marks in some languages may not be displayed.
To Next Page
Loading...
Need help?
General
