11. CUSTOM PRESET (1, 2, 3, 4)
Saves and recalls various settings for the receiver.
12. TUNING MODE, TUNING +/–
Press to operate a tuner (FM/AM).
13. DISPLAY
Displays information on the display panel.
14. RETURN
Returns to the previous menu.
15. HOME
Displays the home menu on the TV screen.
16. ENTER, / / /
Press / / / to select the menu items. Then press ENTER to enter the
selection.
17. OPTIONS
Displays and selects items from the options menus.
18. AMP MENU
Displays the menu on the display panel of the receiver to operate the receiver.
19. IN-CEILING SP
Activates the In-Ceiling Speaker Mode.
20. SOUND FIELD (2CH/A.DIRECT, A.F.D., MOVIE, MULTI ST.)
Selects the sound field you want.
21. HDMI IN 6 (GAME) jack (for STR-ZA3000ES/STR-ZA2000ES only)
Connect to a video game console. The video and sound from your video game console
is input.
Indicator light above (on/standby) button
Green: The receiver is turned on.
Amber: The receiver is in standby mode, and:
[Control for HDMI] or [Network Standby] is set to [On].
[Pass Through] is set to [On] or [Auto].
The power for zone 2 or zone 3 is turned on.
The indicator turns off when the receiver is in standby mode and [Control for HDMI],
[Pass Through] and [Network Standby] are set to [Off], and the power for zone 2 and
zone 3 is turned off.
The top of the cabinet may become hot. This is because part of the circuit(s) inside the
receiver is(are) still turned on, and is not a malfunction.
Note
The indicator flashes slowly when a software update is in progress.
[124] Parts and Controls
Receiver
To Next Page
Loading...
Need help?
General
