[78] Adjusting Settings Network Setup
Enabling the network function even when this receiver is
in standby mode (Network Standby)
1. Select [Setup] - [Network Setup] from the home menu.
2. Select [Network Standby].
3. Set to [On] or [Off].
On : The network function works even when the receiver is in standby mode, and
the receiver resumes operation when controlled over the network.
Off : The network function turns off when the receiver is in standby mode. The
receiver takes more time to resumes operation when powered on again.
Note
When the receiver is in standby mode, the (on/standby) indicator on the front panel
lights up in amber if [Network Standby] is set to [On].
The top of the cabinet may become hot. This is because part of the circuit(s) inside the
receiver is(are) still turned on, and is not a malfunction.
[79] Adjusting Settings
Network Setup
Enjoying Hi-Fi System sound (Music Connect)
Configure settings to enable the receiver to link with a Hi-Fi System device.
1. Select [Setup] - [Network Setup] from the home menu.
2. Select [Music Connect].
3. Select the setting you want.
Connected Device: Select the connected device to enable the function. Select
[Remove Connected Device] to disable the function.
Input for Music Connect: Select the input to link with.
To Next Page
Loading...
Need help?
General
