VAIO Digital Studio™ Reference Manual
38
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
1
Remove the cover (see “Removing the Cover” on page 22).
2
Locate the memory module you wish to remove.
3
Reach around each side of the power supply and push down the
handle on each side of the memory module to eject the module from
its socket.
!
Before opening the system unit, save any open files, exit the Windows
®
operating system, turn off the power of the computer and all attached
peripherals, and then unplug the power cord.
✍
The memory modules are located beneath the power supply. You do not have to remove
the power supply to reach the memory modules.
KY0073.VS
Handles
Push out
KY0042.VSD