40
MUTING
PICTURE WIDE
FAVORITES
TV
VIDEO 1/2/3 VIDEO 4 VIDEO 5
F1
F2
MENU
SLEEP DISPLAY
MODE
SAT/
CABLE
POWER
FREEZE
TOP MENU
RESET PIC OFF MTS/SAP
GUIDE
TV/SAT
DVD/
VCR
MUTING
DISPLAY
2
Watching the TV
2
3
Watching the TV
JUMP
1 Press POWER on the remote control.
Tip
When the 1 (Power on/Stand by) LED goes off, press 1
(Power) on the TV.
2 Select the desired channel using the 0-9 and ENT
(enter) buttons.
Press 0-9 to select a channel. The channel
changes after 2 seconds. Press ENT (enter) to
select immediately.
Use the CH +/– buttons to scan through the
channels.
Tip
When you press and hold CH + or –, the channel number
will change rapidly.
3 Adjust the volume using the VOL +/– buttons.
Other button operations
Press To
MUTING
DISPLAY
JUMP
Tip
You can adjust the volume by referring to the value beside the
volume indicator (on screen).
Mute the sound. Press it again or press
VOL + to restore sound.
Press once to display the current channel
number, and channel label. If set, the
current channel number will display for
10 seconds.
Jump back and forth between two
channels. The TV alternates between the
current channel and the last channel
selected using the 0-9 buttons.
or
1
To Next Page
Loading...
Need help?
General
