Sony ZV-1M2 User Manual

When [Time Code Output] is set to [On], the image may not be output properly to the TV or recording device. In such cases, set
[Time Code Output] to [Off].
If images do not appear on the TV screen properly, select MENU →
(Setup) → [External Output] → [ HDMI Resolution]
→ [2160p/1080p], [1080p] or [1080i] according to the TV to be connected.
During HDMI output, when you switch the movie from 4K to HD image quality or vice-versa, or change the movie to a different
frame rate or different color mode, the screen may become dark. This is not a malfunction.
When [
Proxy Recording] under [ Proxy Settings] is set to [On], images cannot be output to an HDMI device during 4K
movie recording.
If the product performs unwanted operations in response to the TV remote control, select MENU →
(Setup) → [External
Output] → [CTRL FOR HDMI] → [Off].
5-049-603-11(1) Copyright 2023 Sony Corporation
278

Sony ZV-1M2 Specifications

General

Effective Pixels	20.1 megapixels
Optical Zoom	2.7x
Image Stabilization	Optical SteadyShot
Audio Recording	Yes
Sensor Type	Exmor RS CMOS sensor
Lens	ZEISS Vario-Sonnar T* lens
Aperture	F1.8-4
ISO Sensitivity	ISO 125-12800
Autofocus System	Fast Hybrid AF
Video Recording	4K UHD
Video Format	XAVC S, AVCHD
Microphone	Built-in 3-capsule microphone
Display	3.0-inch TFT
Screen Type	Vari-angle
Connectivity	Wi-Fi, Bluetooth
Battery Type	NP-BX1
Battery Life	Approx. 260 shots
Weight	Approx. 292g (with battery and memory card)